CustomCool 23 Manual do Utilizador descarregar pdf (Página 2)

COMBINED AC-DC HARNESS INSTALLATION INSTRUCTIONS FOR

PLASTIC LINER CUSTOMCOOL MODELS WITH UNI-DAMPER

*** Steps 1-7 and 13-21, 23-25 apply to all, Steps 8-12,

22 are model-specific.

1. Unplug the Refrigerator and disconnect the main

water line.

2. Unscrew 3 screws in the FF side and 1 screw in the

FZ side to loosen the CustomCool assembly.

FF Side (3 Screws)

FZ Side (1 Screw)

3. Unscrew 7 screws then disassemble access cover.

4. Unscrew 8 screws then disassemble the main board

cover.

5. Unscrew the ground connection on the case back

and unplug the 3 pin male connector in the Hi Side

area.

6. Unplug the CustomCool fan 2 pin connector and

damper board connection on the main board. The

correct connectors are identiﬁed coming out of the

Sleeve as Shown.

Damper

Board

Connection

CustomCool

Fan Connection

1 2 3 4

Sem comentários

CustomCool 23 Manual do Utilizador Página 2